21
Elevator Installation
1. Gather the horizontal stab, elevator assembly,
elevator “U” rod, 8 elevator hinges, 2 water rud-
ders, and 4 (4-40) Mounting bolts as shown be-
low.
STAB AND ELEVATOR ASSEMBLY
2. Mix epoxy in mixing cup and use a tapered stick
to apply the epoxy inside the pre-drilled holes in
the leading edge of the elevator. Apply epoxy to
one side of the elevator “U” Rod and insert the
“U” Rod completely into the hole. Ensure the
“U” Rod is fully inserted and straight in the ele-
vator before epoxy cures. Wipe away excess
epoxy with alcohol wetted wipes.
3. Ensure the control rod is on the bottom of the
elevator assembly as shown.
4. Repeat steps for the remaining elevator half and
set elevators aside on a flat surface. Insure that
the elevators are aligned with each other before
the epoxy fully cures.
