51
9. Use 4 8-32 bolts, 4 flat washers, and 4 8-32 lock
nuts to install the engine to the mount.
11. Install muffler onto the motor as shown. Blue
loctite is recommended to prevent the bolts from
loosening in flight.
8. Mark the position of the engine mounting holes
on the engine mount. Mark the center of each
engine mounting hole
with a center marking tool or beveled pencil or
pen. Ensure the mark is in the center of the en-
gine mounting hole.
Note:
We recommend the Great Planes
Dead Center Engine Mount Hole Locator
Part
#GPMR8130
.
10. Mark location of the throttle pushrod guide tube
onto the firewall.
Note:
Insure throttle pushrod is lined up with
throttle arm of the carb.
Note:
Follow steps outlined for 4 stroke throt-
tle pushrod assembly
