45
5. Install left and right side of the engine mounting
rails using the supplied 8-32 x 35mm bolts, flat
washers, and split lock washers. The blind nuts
have already been installed in the firewall.
6. Use blue loctite on the mounting bolts to ensure
they do not loosen from vibration.
7. Install the mount to the firewall using the dia-
gram shown below. It is extremely important
that the mount be mounted with the larger rein-
forcing flange towards the engine.
8. Install all four 8-32 x 35mm mounting bolts as
shown below.
Motor mounts
on this side
