23
9. Mix epoxy in mixing cup and use a tapered stick
to apply the epoxy inside the pre-drilled holes in
the leading edge of the elevator. Apply epoxy to
each hinge and install in elevator.
10. Set the elevator assembly aside and allow the
hinges to fully cure. Check the alignment of the
hinges before the glue fully cures to ensure they
are straight and move freely.
11. Gather the fuse, horizontal stab, and wing tube
as shown below.
12. Install wing tube in fuse and place stab in the
stab saddle as shown. Check the alignment of
the horizontal stab against the wing tube. Some
shimming or light sanding may be necessary for
a perfect alignment.
