11
1. Before doing any assembly or installation of any
decals it is very important to re-shrink or re-
tighten the already applied covering. Due to the
shipping process, heat and humidity changes
from different climates, the covering may be-
come lose and wrinkle in the sun. If you take the
time to re-tighten the covering, you will be re-
warded with a long lasting beautifully covered
model.
TIGHTENING AND RE-SHRINKING THE COVERING
2. Using your covering iron with a soft sock, gently
apply pressure and rub in the covering. If any
bubbles occur, your iron may be to hot. Reduce
heat and work slowly.
3.
DO NOT
use a heat gun on the corrugated con-
trol surfaces. Heat applied directly to these sur-
faces will cause the material to deform and bub-
ble.
4. If bubbles persist, use a small pin to punch holes
in the bubble to relieve trapped air and reheat.
