50
4. Use blue loctite on the mounting bolts to ensure
they do not loosen from vibration.
6. Set the engine in between the top and bottom
mounting rails. It may be necessary to clamp the
motor in place for the next few steps.
7. Adjust the motors position until the thrust
washer is 6 1/2” away from the firewall.
3. Install top and bottom side of the engine mount-
ing rails using the supplied 8-32 x 35mm bolts,
flat washers, and split lock washers. The blind
nuts have already been installed in the firewall.
5. Install the mount to the firewall using the dia-
gram shown below. It is extremely important
that the mount be mounted with the larger rein-
forcing flange towards the engine.
Motor mounts
on this side
