49
10. Install the remaining threaded rod and nylon
keeper on the other side of the throttle pushrod.
Attach the clevis to the throttle servo.
2 Stroke Glow Engine Installation
1. Locate the engine mount standoffs for the hori-
zontal motor installation as shown below. There
will be a top and bottom spacer as shown below,
this will create the correct thrust angle for the
engine.
2. The standoffs need to be oriented as shown be-
low. It is very important that they are placed in
the correct location of the firewall to achieve the
proper thrust angle.
9. Slide the pushrod through the guide tube and in-
stall the threaded rod with the clevis. Attach the
clevis to the carburetor.
