96
96
4. Use a piece of dowel stock to fill the predrilled
holes in the firewall. Use a pen to mark the
length of the dowels before cutting them.
5. Cut the dowels to length and glue them in place
using thin CA. Use sandpaper to sand them flush
with the firewall.
6. Finished hardwood dowel installation shown
below.
7. Locate the engine mounting box supplied with
the airplane. Use a rotary cutting tool to remove
the front face of the mounting box as shown be-
low.
8. Front of motor box shown below, this will be
used as the engine mounting template to drill the
new mounting holes.
