95
95
1.80/30cc CESSNA DLE 30 INSTALLATION GUIDE
This engine installation addendum will outline the
installation of the new DLE 30 rear carb engine.
Please use these instructions instead of the DLE 30
side carb instructions shown in the manual.
If you have any questions during the installation of
the rear carb DLE 30 please call Aeroworks at:
303-371-4222
Or email us at [email protected]
1. Remove the fuel tank floor directly behind the
firewall. Use the line shown in the picture
below as a reference for how much of the floor
will be removed. Use a rotary cutting tool to
cut through the floor.
2. Use one 8-32 bolt threaded into the preinstalled
blind nuts and a hammer to lightly tap the blind
nuts loose. It is important to work slowly and not
to damage the firewall during this step.
3. Rear of firewall shown after blind nuts and fuel
tank floor has been removed.
Remove
