97
97
9.
Align the laser etched thrust lines on both the
mounting template and the firewall, use masking
tape to hold the template in place. Use a pen to
mark the location of the 4 new motor mounting
holes as shown below.
10. Use a 13/64 drill bit to drill the engine mounting
holes.
11. Attach the phenolic throttle arm extension to the
throttle arm as shown. Remember to use blue
loctite on the mounting screw to prevent it from
coming loose from vibration.
Note:
It may be necessary to rotate the throttle arm
before attaching the phenolic extension.
12. Attach the engine standoffs to the engine using
the bolts and washers supplied from the manu-
facturer.
