82
1. Cowl installed on fuse as shown below. There
are two mounting options which will depend on
engine selection. These two options will be out-
lined in the following steps.
COWL INSTALLATION
2. The top mounting hole will be used regardless of
engine selection.
3. The bottom mounts for the cowling have two
mounting locations. The airplane comes setup
for a blind style mounting for bolts to pass
through the cowl ring. If these bolts are blocked
by the engine external mounts will be used. The
mounting block and blind nuts have been in-
stalled and all that is required is to drill holes in
the cowl for the mounting bolts. This decision
will be based on the engine selection.
4. Gather the materials as shown below. Template
material, hobby knife, ruler, tape, marker and
pencil.
