25
17a. Before hinges fully cured check the hinges for
proper throw as shown below.
18. Ensure that the elevator control rod is positioned
as shown below.
19. Gather the elevator servo, servo mounting
screws, 1 1/4” servo arm, 4-40 ball link with
hardware, 4-40 clevis, 4-40 threaded inserts and
the elevator pushrod as shown below.
20. Install elevator servo in the fuselage cabin area
as shown below.
Note:
The servo output arm will go towards the front
of the fuselage as shown below.
17b. Temporarily install the water rudder
to ensure that the rear mounting bolt will be
accessible. If more throw is needed, increase
the hinge gap slightly.
