53
30cc Gas Engine Installation
1. The 30cc LC-126will accept a wide range of
engine types. The Satio 1.80, OS 1.60 and DLE
30 was mounted The Satio 1.80 was used for
the test flights.
2. DLE 30, Ignition, Muffler, mounting bolts with
hardware, 1 1/16” standoffs, Motor box, Motor
box mounting hardware shown below.
Note:
Mounting distance from front of firewall to
front of engine prop hub for gas engines:
6 3/4”
Note:
optional wrap around muffler (not shown)
available from Aeroworks
Important:
If using a rear carb DLE 30
please refer to the addendum at
the back of this manual.
GAS ENGINE INSTALLATION
3. Locate the engine mount and remove the 3 wood
screws holding the top hatch in place.
4. Install the bottom 8-32 x 20mm bolts lock wash-
ers and flat washers for the engine mount as
shown. Use blue loctite to ensure the bolts will
not loosen from vibration.
Note:
Use only 8-32 x 20mm bolts to keep from
puncturing fuel tank.
