90
1. Aeroworks has included the new CG Buddy
with the Cessna 195. This handy tool will allow
the builder to balance the airplane without the
need for an assistant.
2. Gather the CG buddy as shown below:
Center Of Gravity– CG Buddy
5 5/8” Back From The Wing Leading Edge
Measured From the Root End of the Wing
3. Slide wings away from fuse and install the CG
Buddy on the wing tube and front rotation dowel as
shown. The cable attachment should be on the top
side of the wing. Make sure the CG Buddy is se-
curely latched to the wing tube and dowel before
moving further.
4. Slide wing back against the fuse as shown be-
low.
5. Install CG Buddy on the opposite wing using
the same methods described above.
6. Attach loop to cable attachment as shown be-
low.
7. Insure both wings are pushed firmly against
fuse.
