manualshive.com logo in svg

Aerohive access point, Руководство по развертыванию

Бесплатное руководство по развертыванию для точки доступа Aerohive доступно для загрузки с manualshive.com. Получите это руководство сегодня и узнайте, как настроить вашу сеть для оптимального подключения. Скачайте руководство сейчас!

Поделиться
Скачать
background image

Deployment Guide

83

 H

IVE

AP 110 

AND

 120 P

RODUCT

 O

VERVIEW

Ethernet Port

The pin assignments in the PoE (Power over Ethernet) 10/100/1000Base-T/TX Ethernet port follow the TIA/EIA-568-B 
standard (see 

Figure 2 on page 52

). The port accepts standard types of Ethernet cable—cat3, cat5, cat5e, or 

cat6—and can receive power over the Ethernet cable from power sourcing equipment (PSE) that is 
802.3af-compatible. If you use cat5, cat5e, or cat6 cables, the ETH0 port can also support 802.3at-compliant PSE. 
Such equipment can be embedded in a switch or router, or it can come from purpose-built devices that inject power 
into the Ethernet line en route to the HiveAP. Because the PoE port has autosensing capabilities, the wiring 
termination in the Ethernet cable can be either straight-through or cross-over.

Reset Button

The reset button allows you to reboot the device or reset the HiveAP to 
its factory default settings. Insert a paper clip, or something similar, into 
the Reset pinhole and press the reset button. To reboot the device, hold 
the button down between 1 and 5 seconds. To return the configuration to 
the factory default settings, hold it down for at least 5 seconds. After 
releasing the button, the status indicator goes dark as the system 
reboots. Then it glows blue while the device boots and the system 
performs a self-test. After the firmware finishes loading and the HiveAP is 
ready to serve clients, the status indicator glows white.

To disable the reset button from resetting the configuration, enter this 
command: 

no reset-button reset-config-enable  

Pressing the 

button between 1 and 5 seconds will still reboot the HiveAP, but pressing 
it for more than 5 seconds will not reset its configuration.

ETH0 PoE Port

The 10/100/1000-Mbps Ethernet port—ETH0—receives an RJ-45 
connector. The HiveAP can receive power through an Ethernet connection 
to the ETH0 port from PSE (power sourcing equipment) that is compatible 
with the 802.3af standard and the forthcoming 802.3at standard. 
Aerohive provides suitable PoE injectors as an optional accessory. (If you 
connect the HiveAP to a power source through the power connector and 
the ETH0 PoE port simultaneously, the device draws power through the 
power connector and automatically disables PoE.)

The ETH0 port is compatible with 10/100/1000Base-T/TX and 
automatically negotiates half- and full-duplex connections with the 
connecting device. It is autosensing and adjusts to straight-through and 
cross-over Ethernet cables automatically. For details, see 

"Ethernet Port" 

on page 83

.

48VDC
Power Connector

The 48-volt DC power connector (0.3 amps), with a voltage range of 36 to 
57 volts DC, is one of two methods through which you can power the 
HiveAP (the other is PoE). To connect it to a 100 – 240-volt AC power 
source, use the AC/DC power adaptor that is available as an extra 
accessory. Because the HiveAP does not have an on/off switch, 
connecting it to a power source automatically powers on the device.

Component

Description

Содержание access point






























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для access point

NetComm YML-O-3G19W User Manual preview
YML-O-3G19W
Бренд: NetComm Страницы: 55
TP-Link Archer GX90 Setup preview
Archer GX90
Бренд: TP-Link Страницы: 2
Mach Power WL-CPE5G24-064 User Manual preview
WL-CPE5G24-064
Бренд: Mach Power Страницы: 30
Ubiquiti airFiber AF-5 Quick Start Manual preview
airFiber AF-5
Бренд: Ubiquiti Страницы: 32
Linksys WAP51AB - Instant Wireless - Access Point Specifications preview
WAP51AB - Instant Wireless - Access Point
Бренд: Linksys Страницы: 2
Draytek VigorAP 802 User Manual preview
VigorAP 802
Бренд: Draytek Страницы: 140
D-Link DIR-2640 User Manual preview
DIR-2640
Бренд: D-Link Страницы: 162
Comtrend Corporation WAP-PC1750W User Manual preview
WAP-PC1750W
Бренд: Comtrend Corporation Страницы: 102
Comtrend Corporation WAP-EN300C User Manual preview
WAP-EN300C
Бренд: Comtrend Corporation Страницы: 109
Comtrend Corporation AC 1200 User Manual preview
AC 1200
Бренд: Comtrend Corporation Страницы: 158
Watchguard WatchGuard AP327X O-105E Hardware Manual preview
WatchGuard AP327X O-105E
Бренд: Watchguard Страницы: 32
Link Play A76 Installation Manual preview
A76
Бренд: Link Play Страницы: 24
Xclaim Xi-3 Quick Setup Manual preview
Xi-3
Бренд: Xclaim Страницы: 3
Xclaim Xi-1 Quick Setup Manual preview
Xi-1
Бренд: Xclaim Страницы: 3
Texas Instruments SimpleLink SWRS225D Manual preview
SimpleLink SWRS225D
Бренд: Texas Instruments Страницы: 69
Ubiquiti 810354026348 Quick Start Manual preview
810354026348
Бренд: Ubiquiti Страницы: 28
Intellinet 522601 User Manual preview
522601
Бренд: Intellinet Страницы: 41
Intellinet 501903 User Manual preview
501903
Бренд: Intellinet Страницы: 51

Бренды по названию

Популярные бренды

Загрузить еще бренды