Aerohive access point, Руководство по развертыванию

Страница: 83 / 221

Chapter 6 HiveAP 100 Series Platforms
82 Aerohive
H
IVE
AP 110
AND
120 P
RODUCT
O
VERVIEW
The HiveAP 110 and 120 are both multi-channel wireless access points. The HiveAP 110 contains a dual-band radio
that can operate at either 2.4-GHz or 5-GHz—but not in both bands simultaneously. The HiveAP 120 contains a
2.4-GHz radio and a 5-GHz radio that can operate concurrently through four internal antennas. The HiveAP 100
series supports a variety of Wi-Fi (wireless fidelity) security protocols, including WPA (Wi-Fi Protected Access) and
WPA2.
You can see the hardware components on the HiveAP in Figure 1 . Each component is described in Table 1 .
Figure 1 HiveAP 110 and 120 hardware components
Table 1 HiveAP 110 and 120 component descriptions
Component Description
Status Indicator The status indicator conveys operational states for system power,
firmware updates, Ethernet and wireless interface activity, and major
alarms. For details, see
"Status Indicator" on page 84 .
Device Lock Slot You can physically secure the HiveAP by attaching a Kensington lock and
cable to the device lock slot. For more information, see
"Locking the
HiveAP" on page 87 .
Reset Pin Device Lock Slot ETH0
PoE Port
48 VDC
Status Indicator