manualshive.com logo in svg

Aerohive access point, Руководство по развертыванию

Бесплатное руководство по развертыванию для точки доступа Aerohive доступно для загрузки с manualshive.com. Получите это руководство сегодня и узнайте, как настроить вашу сеть для оптимального подключения. Скачайте руководство сейчас!

Поделиться
Скачать
background image

Chapter 1 Preparing for a WLAN Deployment

18

Aerohive

Associated Access Point Costs

After you determine how many access points you need, it becomes simpler to determine the other costs involved 
with deploying Wi-Fi because most are driven by the quantity of access points. These costs include the following:

•

Installation and Wiring
•

CAT5 – CAT5 wiring is required for all HiveAPs acting as portals.

1

 One advantage of Aerohive Networks is that 

you can deploy HiveAPs in a mesh to avoid some of the wiring costs.

•

Power – Power lines are required for all HiveAPs acting as mesh points.

2

 Portals receive power through 

power lines or through Ethernet cables by using the Power-over-Ethernet (PoE) option.

•

Installation – HiveAPs can simply snap into standard dropped-ceiling environments. However, if the 
installation is in a warehouse or any environment without dropped ceilings, consider the installation costs.

•

Infrastructure: PoE Switches

You must cable every HiveAP acting as a portal to a switch port. For PoE, there are several considerations:

•

802.3af – The current PoE specification provides enough power for all 802.11a/b/g access points.

•

802.3at – The emerging PoE specification supports higher power devices like 802.11n access points. This 
standard is expected to be ratified at the end of 2008, so products are not yet available. 

•

PoE injectors and midspans – These save money on switch upgrades by injecting power into standard 
Ethernet connections.

•

Site Survey and Debugging Software
•

For a sizable deployment, you probably will use site survey and debugging software. Deployment and 
troubleshooting tools from Ekahau and AirMagnet pay for themselves very quickly. These products enable 
the validation of a deployment and allow you to troubleshoot client and access point issues. (For more 
information, see the section on 

"Operational Considerations" on page 22

.)

•

Professional Services
•

When deploying wireless LANs, professional services are often required perform site surveys.

•

Client  Software
•

Depending on the deployment, users can use built-in Microsoft Windows, Linux and/or Macintosh client 
software (supplicants).

•

For better services and troubleshooting, consider a third-party supplicant such as Juniper Networks Odyssey 
Client.

Bandwidth Assumptions for Wi-Fi

People frequently talk about how much coverage an access point provides; however, it is capacity—not 
coverage—that typically constrains an access point in an enterprise environment. The challenge is not how far the 
RF signal can travel (coverage), but how to deliver enough bandwidth to meet the demands of business applications 
(capacity). In other words, you might be able to cover an office of 50 people with one access point, but if all 50 
people choose to access it at the same time, it might become overloaded. Indeed, if you use the formulas provided 
in this paper, you should find the saturation of access points on your campus to be more than sufficient. Enterprise 
users are accustomed to speedy switched networks and expect similar performance from their wireless LAN 
connections. This is why documenting the size and type of applications that will rely on your WLAN is so critical to 
your planning. In short, if you plan for optimal capacity, complete coverage will follow automatically.

1. A portal is a hive member that links one or more mesh points to the wired LAN.
2. Mesh points are hive members that use a wireless backhaul connection to link through a portal to the wired LAN.

Содержание access point






























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для access point

D-Link AirPlusXtremeG DI-624 Manual preview
AirPlusXtremeG DI-624
Бренд: D-Link Страницы: 83
D-Link AirPlusXtremeG DI-624 User Manual preview
AirPlusXtremeG DI-624
Бренд: D-Link Страницы: 97
Homefibre OMA111WLAN-220 Installation Instructions preview
OMA111WLAN-220
Бренд: Homefibre Страницы: 2
Trapeze Networks Indoor Mobility Point MP-371 Installation Manual preview
Indoor Mobility Point MP-371
Бренд: Trapeze Networks Страницы: 57
Meru Networks AP332 Installation Manual preview
AP332
Бренд: Meru Networks Страницы: 73
Digisol DG-HR3420 User Manual preview
DG-HR3420
Бренд: Digisol Страницы: 82
Hewlett Packard Enterprise AP-504 Manual preview
AP-504
Бренд: Hewlett Packard Enterprise Страницы: 53
D-Link NUCLIAS CONNECT DAP-2680 Quick Installation Manual preview
NUCLIAS CONNECT DAP-2680
Бренд: D-Link Страницы: 48
D-Link DWL-7620AP Quick Installation Manual preview
DWL-7620AP
Бренд: D-Link Страницы: 24
D-Link DWL-8630AP Quick Installation Manual preview
DWL-8630AP
Бренд: D-Link Страницы: 24
D-Link DWL-8620AP Quick Installation Manual preview
DWL-8620AP
Бренд: D-Link Страницы: 24
D-Link DWL-8710AP Quick Installation Manual preview
DWL-8710AP
Бренд: D-Link Страницы: 25
D-Link DWL-8620APE Quick Installation Manual preview
DWL-8620APE
Бренд: D-Link Страницы: 26
D-Link nuclias connect DAP-2662 Quick Installation Manual preview
nuclias connect DAP-2662
Бренд: D-Link Страницы: 12
D-Link Nuclias Connect DAP-2622 User Manual preview
Nuclias Connect DAP-2622
Бренд: D-Link Страницы: 86
D-Link DWL-8720AP Quick Installation Manual preview
DWL-8720AP
Бренд: D-Link Страницы: 18
D-Link Nuclias Connect DAP-2622 Quick Installation Manual preview
Nuclias Connect DAP-2622
Бренд: D-Link Страницы: 8
D-Link Nuclias DBA-2520P Quick Installation Manual preview
Nuclias DBA-2520P
Бренд: D-Link Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды