manualshive.com logo in svg

Aerohive access point, Руководство по развертыванию

Бесплатное руководство по развертыванию для точки доступа Aerohive доступно для загрузки с manualshive.com. Получите это руководство сегодня и узнайте, как настроить вашу сеть для оптимального подключения. Скачайте руководство сейчас!

Поделиться
Скачать
background image

Deployment Guide

29

 H

IVE

AP 20 P

RODUCT

 O

VERVIEW

Power Connector

The 48-volt DC power connector (0.38 amps) is one of two methods through 
which you can power the HiveAP 20. To connect it to a 100 – 240-volt AC 
power source, use the AC/DC power adaptor that is available as an extra 
option. Because the HiveAP does not have an on/off switch, connecting it to a 
power source automatically powers on the device.

Mounting Screw

To mount the HiveAP 20 on a surface, attach the mounting plate that ships 
with the product to the HiveAP by inserting the two pins on the underside of 
the chassis into slots in the plate and tightening the mounting screw. For 
details, see 

"Mounting the HiveAP 20" on page 33

.

10/100 Mbps PoE Port

The 10/100-Mbps Ethernet port supports IEEE 802.3af PoE (Power over 
Ethernet) and receives RJ-45 connectors. The HiveAP can receive its power 
through an Ethernet connection to PSE (power sourcing equipment) that is 
802.3af-compatible, such as one of the PoE injectors available as an optional 
accessory from Aerohive. (If you connect the HiveAP to a power source 
through the power connector and PoE port simultaneously, the device draws 
power through the power connector and automatically disables PoE.)

The HiveAP can also connect to the wired network or to a wired device (such 
as a security camera) through this port. It is compatible with 
10/100Base-T/TX and automatically negotiates half- and full-duplex 
connections with the connecting device. It is autosensing and adjusts to 
straight-through and cross-over Ethernet cables automatically. It also 
automatically adjusts for 802.3af Alternative A and B methods of PoE. For 
details, see 

"Ethernet and Console Ports" on page 30

.

Reset Button

The reset button allows you to reboot the device or reset the HiveAP to its 
factory default settings. Insert a paper clip, or something similar, into the 
Reset pinhole and press the reset button. To reboot the device, hold the 
button down between 1 and 5 seconds. To return the configuration to the 
factory default settings, hold it down for at least 5 seconds. After releasing 
the button, the Power LED goes dark, and then glows steady amber while the 
firmware loads and the system performs a self-test. After the software 
finishes loading, the Power LED glows steady green.

To disable the reset button from resetting the configuration, enter this 
command: 

no reset-button reset-config-enable  

Pressing the 

button between 1 and 5 seconds will still reboot the HiveAP, but pressing it for 
more than 5 seconds will not reset its configuration.

Console Port

A male DB-9 serial port to which you can make a console connection using an 
RS-232 (or "null modem") cable. The management station from which you 
make a serial connection to the HiveAP must have a VT100 emulation 
program, such as Tera Term Pro

©

 (a free terminal emulator) or Hilgraeve 

Hyperterminal

®

 (provided with Windows

®

 operating systems). The following 

are the serial connection settings: bits per second: 9600, data bits: 8, parity: 
none, stop bits: 1, flow control: none.

Device Lock Slot

You can physically secure the HiveAP by attaching a lock and cable (such as a 
Kensington

®

 notebook lock) to the device lock slot. After looping the cable 

around a secure object, insert the T-bar component of the lock into the slot 
on the HiveAP and turn the key to engage the lock mechanism.

802.11b/g RP-SMA Connector

You can connect a detachable single-band antenna, such as the Pulse W1038 
dipole antenna for the 2.4 GHz band, to the male 802.11b/g RP-SMA 
connector. Note that doing so disables the adjacent fixed antenna.

Component

Description

Содержание access point






























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для access point

D-Link DWR-730 Configuration Manual preview
DWR-730
Бренд: D-Link Страницы: 9
D-Link DWL-7100AP Quick Install Manual preview
DWL-7100AP
Бренд: D-Link Страницы: 52
D-Link DWL-3140AP - Web Smart PoE Thin Access Point Install Manual preview
DWL-3140AP - Web Smart PoE Thin Access Point
Бренд: D-Link Страницы: 16
D-Link DWL-3140AP - Web Smart PoE Thin Access Point User Manual preview
DWL-3140AP - Web Smart PoE Thin Access Point
Бренд: D-Link Страницы: 46
D-Link DWL-2100AP - AirPlus Xtreme G Command Line Interface Reference Manual preview
DWL-2100AP - AirPlus Xtreme G
Бренд: D-Link Страницы: 29
D-Link DWL-2100AP - AirPlus Xtreme G Install Manual preview
DWL-2100AP - AirPlus Xtreme G
Бренд: D-Link Страницы: 12
D-Link DIR-320NRU Quick Installation Manual preview
DIR-320NRU
Бренд: D-Link Страницы: 37
D-Link DAP-3220 Install Manual preview
DAP-3220
Бренд: D-Link Страницы: 10
D-Link DAP-2330 v 1.0 Quick Install Manual preview
DAP-2330 v 1.0
Бренд: D-Link Страницы: 16
D-Link DAP-1160 Quick Install Manual preview
DAP-1160
Бренд: D-Link Страницы: 32
D-Link D DWL-8200AP DWL-8200AP Quick Install Manual preview
D DWL-8200AP DWL-8200AP
Бренд: D-Link Страницы: 10
D-Link D DWL-8200AP DWL-8200AP User Manual preview
D DWL-8200AP DWL-8200AP
Бренд: D-Link Страницы: 97
D-Link D DWL-8200AP DWL-8200AP Install Manual preview
D DWL-8200AP DWL-8200AP
Бренд: D-Link Страницы: 16
D-Link D DWL-8200AP DWL-8200AP Manual preview
D DWL-8200AP DWL-8200AP
Бренд: D-Link Страницы: 129
D-Link AirPremier DWL-7700AP Install Manuals preview
AirPremier DWL-7700AP
Бренд: D-Link Страницы: 12
D-Link AirPremier DWL-7700AP User Manual preview
AirPremier DWL-7700AP
Бренд: D-Link Страницы: 84
D-Link DWL-7100AP Manual preview
DWL-7100AP
Бренд: D-Link Страницы: 76
D-Link DWL-7100AP Quick Installation Manual preview
DWL-7100AP
Бренд: D-Link Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды