manualshive.com logo in svg

Aerohive access point, Руководство по развертыванию

Бесплатное руководство по развертыванию для точки доступа Aerohive доступно для загрузки с manualshive.com. Получите это руководство сегодня и узнайте, как настроить вашу сеть для оптимального подключения. Скачайте руководство сейчас!

Поделиться
Скачать
background image

Deployment Guide

109

 I

NSTALLING

 

AND

 C

ONNECTING

 

TO

 

THE

 H

IVE

M

ANAGER

 GUI

I

NSTALLING

 

AND

 C

ONNECTING

 

TO

 

THE

 H

IVE

M

ANAGER

 GUI

To begin using the HiveManager GUI, you must first configure the MGT interface to be accessible on the network, 
cable HiveManager and your management system (that is, your computer) to the network, and then make an HTTP 
connection from your system to the MGT interface.

Besides HiveManager and your management system, you need two or three Ethernet cables and a serial cable (or 
"null modem"). The Ethernet cables can be standard cat3, cat5, cat5e, or cat6 cables with T568A or T568B 
terminations and RJ-45 connectors. The serial cable must comply with the RS-232 standard and terminate on the 
HiveManager end with a female DB-9 connector. (For more details, see 

"Ethernet and Console Ports" on page 91

.)

The GUI requirements for the management system are as follows:
•

Minimum screen resolution of 1280 x 1024 pixels

•

Standard browser—Aerohive recommends Internet Explorer v7.0 or Mozilla Firefox v2.0.0 or later—with Flash 

v9.0 or later, which is required for viewing charts with dynamically updated HiveAP alarms and wireless client 

data

Your management system also needs a VT100 terminal emulation program, such as Tera Term Pro

©

 (a free terminal 

emulator) or Hilgraeve Hyperterminal

®

 (provided with Windows

®

 95 to Windows XP operating systems).

You also need an order ID or, for a physical HiveManager appliance, a license key. You can obtain these by sending an 
email request to Aerohive Support at 

[email protected]

. Include your sales order ID and—for a physical 

HiveManager appliance or HiveManager Virtual Appliance—a HiveManager system ID. Aerohive will send you back an 
order ID or license key.

Changing Network Settings

To connect HiveManager to the network, you must first set the IP address/netmask of its MGT interface so that it is 
in the subnet to which you plan to cable it. To do this, you can use the HiveManager console port.

1. Connect the power cable to a 100 – 240-volt power source, and turn on HiveManager. The power switch is on the 

back panel of the device.

2. Connect one end of an RS-232 serial cable to the serial port (or COM port) on your management system.
3. Connect the other end of the cable to the male DB-9 console port on HiveManager.
4. On your management system, run a VT100 emulation program using the following settings:

•

Bits per second (baud rate): 9600

•

Data bits: 8

•

Parity: none

•

Stop  bits:  1

•

Flow control: none

5. Log in by entering the default user name (admin) and password (aerohive).
6. The HiveManager CLI shell launches. To change network settings, enter

 1 

(1

Network Settings and 

Tools)

, and then enter

 1 

again

 (1 View/Set IP/Netmask /Gateway/DNS Settings)

.

7. Follow the instructions to configure the IP address and netmask for the MGT interface, its default gateway, the 

HiveManager host name and domain name, and its primary DNS server.

Note:

HiveManager has two Ethernet interfaces—MGT and LAN. You can put just the MGT interface on the 
network and use it for all types of traffic, or you can use both interfaces—which must be in different 
subnets—and separate HiveManager management traffic (MGT) from HiveAP management traffic (LAN).

Note:

The default IP address/netmask for the MGT interface is 192.168.2.10/24. The default gateway IP 
address is 192.168.2.1. The LAN interface is disabled by default and does not have a default IP address. 
You can define network settings for the LAN interface through the HiveManager GUI after you log in.

Содержание access point






























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для access point

Tenda TWL54A User Manual preview
TWL54A
Бренд: Tenda Страницы: 34
iBall Baton iB-W3GX150N User Manual preview
iB-W3GX150N
Бренд: iBall Baton Страницы: 61
NETGEAR WGM124 Specifications preview
WGM124
Бренд: NETGEAR Страницы: 2
EE Bright Box Quick Start Manual preview
Bright Box
Бренд: EE Страницы: 2
NEBRA ROCK Pi Quick Start Manual preview
ROCK Pi
Бренд: NEBRA Страницы: 10
Cisco AT&T U-VERSE VEN401 User Manual preview
AT&T U-VERSE VEN401
Бренд: Cisco Страницы: 52
Cisco Aironet 2600 Series Getting Started Manual preview
Aironet 2600 Series
Бренд: Cisco Страницы: 38
Cisco C9117AXI-ME-x Getting Started Manual preview
C9117AXI-ME-x
Бренд: Cisco Страницы: 36
Cisco Aironet 1850 Series Deployment Manual preview
Aironet 1850 Series
Бренд: Cisco Страницы: 67
Cisco Aironet 3600 Series Getting Started Manual preview
Aironet 3600 Series
Бренд: Cisco Страницы: 40
Cisco DigiStar E320.1 User Manual preview
DigiStar E320.1
Бренд: Cisco Страницы: 18
Cisco Aironet 700W Series Getting Started Manual preview
Aironet 700W Series
Бренд: Cisco Страницы: 31
Cisco DPH650 User Manual preview
DPH650
Бренд: Cisco Страницы: 36
Cisco Aironet 1815T Getting Started Manual preview
Aironet 1815T
Бренд: Cisco Страницы: 29
Cisco C9130AXE Series Getting Started Manual preview
C9130AXE Series
Бренд: Cisco Страницы: 48
Cisco Aironet OfficeExtend AIR-OEAP602I-E-K9 User Manual preview
Aironet OfficeExtend AIR-OEAP602I-E-K9
Бренд: Cisco Страницы: 26
Cisco Aironet 2700 Series Deployment Manual preview
Aironet 2700 Series
Бренд: Cisco Страницы: 88
Cisco Catalyst IW6300 Series Installing Manual preview
Catalyst IW6300 Series
Бренд: Cisco Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды