manualshive.com logo in svg

Aerohive access point, Руководство по развертыванию

Бесплатное руководство по развертыванию для точки доступа Aerohive доступно для загрузки с manualshive.com. Получите это руководство сегодня и узнайте, как настроить вашу сеть для оптимального подключения. Скачайте руководство сейчас!

Поделиться
Скачать
background image

Chapter 5 The HiveAP 320 Platform

74

Aerohive

Ethernet and Console Ports

There are three ports on the HiveAP 320: two RJ-45 10/100/1000Base-T/TX Ethernet ports and an RJ-45 console port.

The pin assignments in the PoE (Power over Ethernet) Ethernet ports follow the TIA/EIA-568-B standard (see 

Figure 2 on page 52

). The ports accept standard types of Ethernet cable—cat3, cat5, cat5e, or cat6. The ETH0 port 

can receive power over the Ethernet cable from power sourcing equipment (PSE) that is 802.3af-compatible. If you 
use cat5, cat5e, or cat6 cables, the ETH0 port can also support 802.3at-compliant PSE. Such equipment can be 
embedded in a switch or router, or it can come from purpose-built devices that inject power into the Ethernet line 
en route to the HiveAP. Because the PoE ports have autosensing capabilities, the wiring termination in the Ethernet 
cable can be either straight-through or cross-over.

The HiveAP 320 supports the following features on its Ethernet ports:

•

The HiveAP 320 supports smart PoE on its ETH0 port to adapt its power consumption to changes in the 
amount of power available to it over Ethernet from PSE (power sourcing equipment). For more information, 
see 

"Smart PoE" on page 53

.

•

The two Ethernet interfaces can be configured as aggregate interfaces for increased throughput and 
redundant interfaces for increased reliability. For more information, see 

"Aggregate and Redundant 

Interfaces" on page 53

.

Through the RJ-45 console port, you can make a serial connection between your management system and the 
HiveAP. The pin-to-signal mapping of the RJ-45 console port is the same as that for the HiveAP 340, which is shown 
shown in 

Figure 3 on page 55

. Similarly, cabling and connection details for the HiveAP 320 are same as those for the 

HiveAP 340 (see 

Figure 4 on page 55

).

Status LEDs

The five status LEDs on the top of the HiveAP 320 indicate various states of activity through their color (dark, green, 
amber, and red) and illumination patterns (steady glow or pulsing). The meanings of the various color + illumination 
patterns for each LED are explained below.

Power

•

Dark:  No  power

•

Steady green: Powered on and the firmware is running normally

•

Pulsing green: Firmware is booting up

•

Steady amber: Firmware is being updated

•

Pulsing amber: Alarm indicating a firmware issue has occurred

•

Steady red: Alarm indicating a hardware issue has occurred

ETH0 and ETH1

•

Dark: Ethernet link is down or disabled

•

Steady green: 1000 Mbps Ethernet link is up but inactive

•

Pulsing green: 1000 Mbps Ethernet link is up and active

•

Steady amber: 10/100 Mbps Ethernet link is up but inactive

•

Pulsing amber: 10/100 Mbps Ethernet link is up and active

WIFI0 and WIFI1

•

Dark: Wireless interface is disabled

•

Steady green: Wireless interface is in access mode but inactive

•

Pulsing green: Wireless interface is in access mode and active

•

Steady amber: Wireless interface is in backhaul mode but inactive

•

Pulsing amber: Wireless interface is in backhaul mode and is connected with other hive members

•

Alternating green and amber: Wireless interface is in backhaul mode and is searching for other hive 
members

Содержание access point






























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для access point

Lancom OAC-54-1 Manual preview
OAC-54-1
Бренд: Lancom Страницы: 79
TRENDnet TEW-311BRP User Manual preview
TEW-311BRP
Бренд: TRENDnet Страницы: 127
Topcom Skyr@cer 544 Quick Installation Manual preview
Skyr@cer 544
Бренд: Topcom Страницы: 196
Tenda N3 11N User Manual preview
N3 11N
Бренд: Tenda Страницы: 80
Compaq iPAQ Connection Point CP-1 User Manual preview
iPAQ Connection Point CP-1
Бренд: Compaq Страницы: 50
P1 dx-825 Setup Manual preview
dx-825
Бренд: P1 Страницы: 10
Billion BiPAC 8800AXL User Manual preview
BiPAC 8800AXL
Бренд: Billion Страницы: 230
Kobian Wireless LAN Access Point User Manual preview
Wireless LAN Access Point
Бренд: Kobian Страницы: 35
TRENDnet TEW -739APBO Quick Installation Manual preview
TEW -739APBO
Бренд: TRENDnet Страницы: 18
Aztech MWR647 Easy Start Manual preview
MWR647
Бренд: Aztech Страницы: 20
USR IOT USR-G808 User Manual preview
USR-G808
Бренд: USR IOT Страницы: 66
u-blox EVK-R4 Series User Manual preview
EVK-R4 Series
Бренд: u-blox Страницы: 31
P2 Mobile Technologies Z500 User Manual preview
Z500
Бренд: P2 Mobile Technologies Страницы: 15
Multitech MultiModem rCell MTCBA-H3-EN3-P1 User Manual preview
MultiModem rCell MTCBA-H3-EN3-P1
Бренд: Multitech Страницы: 71
Multitech MultiModem rCell User Manual preview
MultiModem rCell
Бренд: Multitech Страницы: 100
Sierra Wireless Overdrive Pro 3G User Manual preview
Overdrive Pro 3G
Бренд: Sierra Wireless Страницы: 174
Linksys WRT32X User Manual preview
WRT32X
Бренд: Linksys Страницы: 720
Ubiquiti IsoStation 5AC IS-5AC Quick Start Manual preview
IsoStation 5AC IS-5AC
Бренд: Ubiquiti Страницы: 24

Бренды по названию

Популярные бренды

Загрузить еще бренды