manualshive.com logo in svg

Aerohive access point, Руководство по развертыванию

Бесплатное руководство по развертыванию для точки доступа Aerohive доступно для загрузки с manualshive.com. Получите это руководство сегодня и узнайте, как настроить вашу сеть для оптимального подключения. Скачайте руководство сейчас!

Поделиться
Скачать
background image

Chapter 12 Common Configuration Examples

146

Aerohive

This example assumes that you have already accepted the HiveAPs for HiveManager management, assigned them to 
a WLAN policy that includes a hive and at least one SSID, and pushed that configuration to them. In other words, the 
HiveAPs are already under HiveManager management by the time you begin the configuration in this example. If 
that is not yet the case, see 

"Basic Configuration Examples" on page 123

 before continuing.

VLANs and User Profiles

To begin, you create two VLAN objects and then two user profiles, each of which references one of the VLANs. When 
you configure the SSID later, you reference both user profiles in the SSID configuration. With this approach, the 
HiveAPs apply different VLANs to traffic from different users based on their corresponding user profiles.

1. To create a VLAN object for employee traffic, click Configuration > Advanced Configuration > Network 

Objects > VLANs > New, and then enter the following in the VLANs dialog box:

VLAN Name: VLAN-10

Enter the following, and then click Apply:

VLAN ID: 10

Type: Global

Setting the type as "Global" means that HiveManager applies the VLAN entry to all HiveAPs that 
include the VLAN object in their configuration—unless you add another VLAN entry to this VLAN 
object and assign it a more specific classification type such as a classifier tag, map, or HiveAP. Then 
the HiveAP applies the other VLAN entry if it has the same classifier tag, is on the specified map, or 
is the specified HiveAP.

Description: VLAN for employees

2. To save the configuration and close the VLANs dialog box, click Save.
3. To create a VLAN object for IT staff traffic, select the check box for the newly created VLAN object "VLAN-10" in 

the list on the Configuration > Advanced Configuration > Network Objects > VLANs page, and then click Clone.

The VLANs dialog box appears with the settings for VLAN-10.

4. For VLAN Name, enter VLAN-20; in the VLAN ID field, change 10 to 20; modify the Description field to VLAN for 

IT staff; and then click Save.

You can see the two newly created VLAN objects on the Configuration > Advanced Configuration > Network 
Objects > VLANs page. 

5. To create a user profile for employees, click Configuration > User Profiles > New, enter the following, leave 

the other settings as they are, and then click Save:

Name: Emp(1)

Including the attribute number "(1)" as part of the user profile name is helpful when troubleshooting 
and when configuring the RADIUS server. The name "Emp(1)" serves as reminder to use 1 as the 
Tunnel-Private-Group-ID attribute when configuring the RADIUS server. HiveAPs use a combination 
of three RADIUS attributes to determine which user profile to assign to an authenticated user: 
Tunnel-Type = GRE (10), Tunnel-Medium-Type = IP (1), and Tunnel-Private-Group-ID = <number>. If a 
HiveAP receives all three attributes and the third one matches a user profile attribute, it then 
applies that user profile to traffic from the authenticated user. Including the attribute number in 
the user profile name makes configuring the RADIUS server a bit simpler.

Attribute Number: 1

Default VLAN: VLAN-10

Description: For employees to use VLAN 10

Содержание access point






























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для access point

D-Link DAP-1320 Manual preview
DAP-1320
Бренд: D-Link Страницы: 4
D-Link N300 Quick Install Manual preview
N300
Бренд: D-Link Страницы: 2
Cambium Networks PTP 820 Series Installation Instructions preview
PTP 820 Series
Бренд: Cambium Networks Страницы: 3
Cambium Networks PTP 820G Installation Manual preview
PTP 820G
Бренд: Cambium Networks Страницы: 68
Lantronix PremierWave 2050 Quick Start Manual preview
PremierWave 2050
Бренд: Lantronix Страницы: 2
Arris RUCKUS ZoneDirector 1200 Quick Setup Manual preview
RUCKUS ZoneDirector 1200
Бренд: Arris Страницы: 2
Airlink101 AR580W3G User Manual preview
AR580W3G
Бренд: Airlink101 Страницы: 134
SoftBank 304HW User Manual preview
304HW
Бренд: SoftBank Страницы: 231
Kaba 9200 Quick Manual preview
9200
Бренд: Kaba Страницы: 2
EnGenius EOA3630 User Manual preview
EOA3630
Бренд: EnGenius Страницы: 58
EnGenius ENH700EXT User Manual preview
ENH700EXT
Бренд: EnGenius Страницы: 67
EnGenius EAP1750H User Manual preview
EAP1750H
Бренд: EnGenius Страницы: 64
Multitech Conduit AP MTCAP-868-002A User Manual preview
Conduit AP MTCAP-868-002A
Бренд: Multitech Страницы: 30
PI Manufacturing ANT-3526-H Installation Manual preview
ANT-3526-H
Бренд: PI Manufacturing Страницы: 23
AVM FRITZ!Box 7590AX Manual preview
FRITZ!Box 7590AX
Бренд: AVM Страницы: 288
Walmart WMBR-1 User Manual preview
WMBR-1
Бренд: Walmart Страницы: 4
Zoomnet Bgate-GT10-I User Manual preview
Bgate-GT10-I
Бренд: Zoomnet Страницы: 31
Zoomnet Bgate-GT10-D24-N22-P User Manual preview
Bgate-GT10-D24-N22-P
Бренд: Zoomnet Страницы: 31

Бренды по названию

Популярные бренды

Загрузить еще бренды