manualshive.com logo in svg

Aerohive access point, Руководство по развертыванию

Бесплатное руководство по развертыванию для точки доступа Aerohive доступно для загрузки с manualshive.com. Получите это руководство сегодня и узнайте, как настроить вашу сеть для оптимального подключения. Скачайте руководство сейчас!

Поделиться
Скачать
background image

Chapter 11 Basic Configuration Examples

132

Aerohive

If the HiveAP does not have any network settings, check that it can reach the DHCP server. To check 
if a DHCP server is accessible, enter

 interface mgt0 dhcp-probe vlan-range 

<number1>

 

<

number2>

, in which

 <number1> 

and

 <number2> 

indicate the range of VLAN IDs on which you 

want the HiveAP to probe for DHCP servers. The results of this probe indicate if a DHCP server is 
present and has responded. If the probe succeeds, check the DHCP server for MAC address filters or 
any other settings that might interfere with delivery of network settings to the HiveAP.

•

Are the HiveAPs in the same subnet as HiveManager?
HiveAPs must be in the same subnet and the same VLAN as HiveManager for their broadcast CAPWAP 
Discovery messages to reach it. If you can move the HiveAPs or HiveManager so that they are all in the 
same subnet, do so. If they must be in different subnets from each other, it is still possible for the 
HiveAPs to contact HiveManager, but not by broadcasting CAPWAP messages. For a list of other 
connection options, see 

"How HiveAPs Connect to HiveManager" on page 133

.

•

Can the HiveAPs ping the IP address of the HiveManager MGT interface?
Enter the

 ping 

<ip_addr>

 

command on the HiveAP, where the variable

 <ip_addr> 

is the IP 

address of the HiveManager MGT interface. If it does not elicit any ICMP echo replies from HiveManager, 
make sure that HiveManager is connected to the network through its MGT interface, not its LAN 
interface, and that the IP address settings for the MGT interface are accurate (see HM Admin > 
HiveManager Settings > Interface Settings in the HiveManager GUI).

•

What is the status of the CAPWAP client running on the HiveAP?
To check the CAPWAP status of a HiveAP, enter the

 show capwap client 

command. Compare the 

"RUN state" with the CAPWAP states explained in 

Figure 4 on page 130

. Check that the HiveAP has an IP 

address for itself and the correct address for HiveManager. If for some reason, the HiveAP does not have 
the correct address for HiveManager, you can set it manually by entering the

 capwap client server 

name

 <ip_addr> 

command, in which

 <ip_addr> 

is the HiveManager MGT interface IP address.

When HiveAPs have contacted HiveManager, they appear in the Monitor > Access Points > HiveAPs page, as 
shown in 

Figure 5

.

Figure 5 

Monitor > Access Points > HiveAPs (view mode: Monitor)

Note:

If you see a different group of HiveAP settings, make sure that 

Monitor

 is selected as the view mode at the 

top of the HiveAPs page. The GUI provides two view modes for HiveAPs, one that focuses on monitoring 
HiveAPs (Monitor) and another that focuses on configuring them (Config).

The AP type for HiveAP1 and HiveAP2 is 
"Portal"; they have Ethernet connections to 
the network. HiveAP3 is "Mesh Point"; it 
connects to the network through a portal.

The host names have been changed to match 
those in the example. By default, the host 
name is 

AH-

 + the last six bytes of its MAC 

address. (Example: AH-0E5580)

Audit icon 
Green red triangle: The 
configuration on a HiveAP does not 
match that on HiveManager.
Two green squares: They match.

CAPWAP connection and security icons:
Green linked chain/red unlinked chain: The 
HiveAP is connected or disconnected.
Green locked padlock/red unlocked padlock: 
Connection is secured through DTLS or not.

You can customize the table contents 
by clicking the Edit Table icon. You 
can add more columns (radio 
channels and power for example), 
remove columns, and reorder them.

Содержание access point






























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для access point

Meru Networks AP822 Installation Manual preview
AP822
Бренд: Meru Networks Страницы: 66
3Com 3CRWE915075 - AirConnect 9150 11n 2.4 GHz PoE Access... User Manual preview
3CRWE915075 - AirConnect 9150 11n 2.4 GHz PoE Access...
Бренд: 3Com Страницы: 83
H3C MSR900-E Routers Installation, Quick Start preview
MSR900-E Routers
Бренд: H3C Страницы: 2
sauter LET4104RK100 Manuallines For The Electrician preview
LET4104RK100
Бренд: sauter Страницы: 8
Loopcomm LP-2396K User Manual preview
LP-2396K
Бренд: Loopcomm Страницы: 94
Linksys E2500 V4 Quick Start Manual preview
E2500 V4
Бренд: Linksys Страницы: 32
VDO MOBILE HOTSPOT Brochure preview
MOBILE HOTSPOT
Бренд: VDO Страницы: 2
Aztech Cable/DSL Wireless Broadband4-Port Router Easy Start preview
Cable/DSL Wireless Broadband4-Port Router
Бренд: Aztech Страницы: 25
Proxim ORINOCO AP-4000MR Quick Installation Manual preview
ORINOCO AP-4000MR
Бренд: Proxim Страницы: 2
LXE 6250 Configuration Manual preview
6250
Бренд: LXE Страницы: 6
Deco X80-5G User Manual preview
X80-5G
Бренд: Deco Страницы: 64
Texas Instruments SimpleLink SWRS225D Manual preview
SimpleLink SWRS225D
Бренд: Texas Instruments Страницы: 69
Seeed W600 Module Manual preview
W600 Module
Бренд: Seeed Страницы: 17
Ubiquiti Bullet AC-IP67 Quick Start Manual preview
Bullet AC-IP67
Бренд: Ubiquiti Страницы: 11
Ubiquiti airMAX PowerBeam PBE-M5-300 Quick Start Manual preview
airMAX PowerBeam PBE-M5-300
Бренд: Ubiquiti Страницы: 13
3Com 8250 User Manual preview
8250
Бренд: 3Com Страницы: 93
Ebyte E32-433T20D User Manual preview
E32-433T20D
Бренд: Ebyte Страницы: 22
Gis TS-MX300-HF Quick Start Manual preview
TS-MX300-HF
Бренд: Gis Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды