manualshive.com logo in svg

Aerohive access point, Руководство по развертыванию

Бесплатное руководство по развертыванию для точки доступа Aerohive доступно для загрузки с manualshive.com. Получите это руководство сегодня и узнайте, как настроить вашу сеть для оптимального подключения. Скачайте руководство сейчас!

Поделиться
Скачать
background image

Deployment Guide

121

 U

PDATING

 H

IVE

OS F

IRMWARE

In the Activation Time section, select one of the following options, depending on when you want to activate the 
firmware—by rebooting the HiveAPs—after HiveManager finishes loading it:

•

Activate at: Select and set the time at which you want the HiveAPs to activate the firmware. To use 
this option accurately, make sure that both HiveManager and managed HiveAP clocks are synchronized.

•

Activate after: Select to load the firmware on the selected HiveAPs and activate it after a specified 
interval. The range is 0 – 3600 seconds; that is, immediately to one hour. The default is 5 seconds.

•

Activate at next reboot: Select to load the firmware and not activate it. The loaded firmware gets 
activated the next time the HiveAP reboots.

10. To save your settings, click the Save icon in the upper right corner. Otherwise, click the Close icon to use these 

settings just this time. If you do not save your modified settings, the next time you upload a HiveOS image to 
HiveAPs, HiveManager will again apply the default settings.

11. Select the file you just loaded from the HiveOS Image drop-down list, select one or more HiveAPs at the bottom 

of the dialog box, and then click Upload.
HiveManager displays the progress of the HiveOS image upload—and its eventual success or failure—on the 
Monitor > Access Points > HiveAP Update Results page.

Updating HiveAPs in a Mesh Environment

When updating hive members in a mesh environment, be careful of the order in which the HiveAPs reboot. If a 
portal completes the upload and reboots before a mesh point beyond it completes its upload—which most likely 
would happen because portals receive the uploaded content first and then forward it to mesh points—the reboot 
will interrupt the data transfer to the mesh point. This can also happen if a mesh point linking HiveManager to 
another mesh point reboots before the more distant mesh point completes its upload. As a result of such an 
interruption, the affected mesh point receives an incomplete firmware or configuration file and aborts the update.

Figure 11 

HiveAPs in a mesh environment

To avoid the reboot of an intervening HiveAP from interfering with an ongoing upload to a mesh point beyond it, 
allow enough time for the firmware to reach the farthest mesh points before activating the firmware. After all the 
HiveAPs have the firmware, rebooting any HiveAPs between them and HiveManager becomes inconsequential.

Note:

When choosing which option to use, consider how HiveManager connects to the HiveAPs it is 
updating. See 

"Updating HiveAPs in a Mesh Environment"

.

Note:

A mesh point is a hive member that uses a wireless backhaul connection to communicate with the rest of 
the hive. HiveManager manages mesh points through another hive member that acts as a portal, which 
links mesh points to the wired LAN.

= Wired Link

= Wireless Link

HiveManager

Switch

HiveAP
(Portal)

HiveAP

(Mesh Point 1)

HiveAP

(Mesh Point 2)

When updating HiveAPs in a mesh environment, the HiveManager communicates with mesh points through 
their portal and, if there are any intervening mesh points, through them as well. While updating HiveAPs in 
such an environment, it is important to keep the path from the HiveManager to all HiveAPs clear so that the 
data transfer along that path is not disrupted. Therefore, when updating a firmware image or configuration 
on HiveAPs in a mesh environment, make sure that the portal or a mesh point closer to the portal does not 
reboot before the upload to a mesh point farther away completes.

Содержание access point






























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для access point

D-Link DIR-506L Datasheet preview
DIR-506L
Бренд: D-Link Страницы: 3
D-Link DI-524UP Quick Instruction Manual preview
DI-524UP
Бренд: D-Link Страницы: 12
Global Telecom MiFi 8000 Reference Manual preview
MiFi 8000
Бренд: Global Telecom Страницы: 5
E-Lins WAP100 series User Manual preview
WAP100 series
Бренд: E-Lins Страницы: 52
Mach Power WL-ICNAP24-074 User Manual preview
WL-ICNAP24-074
Бренд: Mach Power Страницы: 24
ZyXEL Communications NBG-415 Quick Start Manual preview
NBG-415
Бренд: ZyXEL Communications Страницы: 109
Ubiquiti RP5AC-PRISM Quick Start Manual preview
RP5AC-PRISM
Бренд: Ubiquiti Страницы: 24
Sercomm RP052M User Manual preview
RP052M
Бренд: Sercomm Страницы: 14
4next RS232 Series Quick Start preview
RS232 Series
Бренд: 4next Страницы: 2
Calix T073G HGU ONT User Manual preview
T073G HGU ONT
Бренд: Calix Страницы: 20
Billion 810VNTX User Manual preview
810VNTX
Бренд: Billion Страницы: 130
SWEEX LW140 Manual preview
LW140
Бренд: SWEEX Страницы: 8
SWEEX LW310V2 Manual preview
LW310V2
Бренд: SWEEX Страницы: 32
Planet PRT-301W User Manual preview
PRT-301W
Бренд: Planet Страницы: 32
Planet WAP-4000A User Manual preview
WAP-4000A
Бренд: Planet Страницы: 27
Planet XRT-411 User Manual preview
XRT-411
Бренд: Planet Страницы: 99
Planet 802.11n Wireless ADSL 2/2+ Router ADN-4000 User Manual preview
802.11n Wireless ADSL 2/2+ Router ADN-4000
Бренд: Planet Страницы: 91
Planet FRT-405N User Manual preview
FRT-405N
Бренд: Planet Страницы: 108

Бренды по названию

Популярные бренды

Загрузить еще бренды