ADTRAN Atlas 800 Plus, Руководство пользователя

Страница: 125 / 210

Chapter 10. Dial Plan Terminal Menu
61200226L1-1 ATLAS 800
PLUS
User Manual 10-13
»» Direct Inward
Dialing
Write security: 3; Read security: 5
This defines to ATLAS whether or not DID is being used by the Network. If
DID is Enabled, then the following information must be defined:
»» Trunk Number Write security: 3; Read security: 5
When the Network connection does not provide DID digits, then ATLAS
must be given a number to use to determine which user end point should
receive the incoming call. This field only displays when Direct Inward Dial-
ing is set to Disabled. For example, if a certain incoming DS0 (trunk) is
meant to connect to an end point with the accept number of 963-8615, the
trunk number would be set to 963-8615.
»» Strip MSD
Write Security: 3 Read Security: 5
Strips a selected quantity of the Most Significant Digits (MSD) of a dialed
number prior to being forwarded out of the port. For example, a Network
port set to accept all calls beginning with 9 (9$), and with
Strip MSD
set to
1, would send all digits toward the Network except the leading 9.
»» Source ID
The
Source ID
field is used to simplify the creation of a Dial Plan in appli-
cations where the criteria for switching calls to a certain end point is a func-
tion of which end point originated the call.
• Default value = 0. The default ID for all end points is 0 and all accept # s
is 0. With default values, all calls are routed based only on dialed num-
ber.
• Multiple end points can have the same Source ID
DID Digits
Transferred Write security: 3; Read security: 5
Defines the number of digits sent to ATLAS from the Net-
work if DID is used.
DID Prefix
Write security: 3; Read security: 5
Defines to ATLAS the prefix digits which are not received as
a part of the DID number. ATLAS uses the combination of
prefix and DID number to determine the User end point
that should receive the incoming call.
This option only displays if Direct Inward Dialing (DID) is
set to Enabled. If DID is Disabled, then you must define the
trunk number.
The trunk number must be specific (i.e., no “wild cards”).
Strip MSD
does not affect the
Call Accept
criteria. All of the
digits (including the MSDs that are subsequently stripped) are
used as accept criteria.