ADTRAN Atlas 800 Plus, Руководство пользователя

Страница: 129 / 210

Chapter 10. Dial Plan Terminal Menu
61200226L1-1 ATLAS 800
PLUS
User Manual 10-17
» Caller ID Number
Write security: 3; Read security: 5
Defines the number for ATLAS to use to provide Caller ID to the Network
for outgoing calls sent through this end point. This option only displays if
Direct Inward Dialing is set to
Disabled
. This item is optional.
»» Strip MSD
Write Security: 3 Read Security: 5
This option allows a selected quantity of the Most Significant Digits (MSD)
of a dialed number to be stripped prior to being forwarded out of the port.
For example, a User port could be set to accept all calls beginning with 8
(8$), and then with Strip MSD set to 1, all digits would be sent toward the
network except the leading 8.
»» Source ID
Write security: 3; Read security: 5
The
Source ID
field simplifies the creation of a Dial Plan in applications
where the criteria for switching calls to a certain end point is a function of
which endpoint originated the call.
• Default value = 0. The default ID for all end points is 0 and all accept # s
is 0. With default values, all calls are routed based only on dialed num-
ber.
• Multiple end points can have the same Source ID.
• When creating the
Call Accept
list, specify a
Source ID
(s) as well as a
dialed number or range of dialed numbers to accept.
For example, an application requires that all calls that originate from Port 1
of the Quad T1/PRI module in Slot 1 be switched to Port 4 of that same mod-
ule. Assign a unique Source ID (e.g. 7) to Port 1 of the module, and then con-
figure Port 4 to only accept calls from that unique Source ID (7).
.
QUAD NX56/64 MODULE (USER TERMINATION)
When you are working in the
User Termination
section of the
Dial Plan
menu, and the
Slot
is defined as a QuadNx56/64 module, the following in-
terface configuration options are available:
The Caller ID number must be specific (i.e., no “wild cards”).
The Strip MSD parameter does not affect the Call Accept criteria.
All of the digits (including the MSDs that are subsequently
stripped) are used as accept criteria.
The Quad Nx56/64 can only serve as a user termination end point.