ADTRAN Atlas 800 Plus, Руководство пользователя

Страница: 123 / 210

Chapter 10. Dial Plan Terminal Menu
61200226L1-1 ATLAS 800
PLUS
User Manual 10-11
would almost always be correct. If less than All digits are sent, then the
prefix is defined below.
»» Outgoing Caller ID
Write Security: 3 Read Security: 5
Inserts a called ID based on the following selections.
»» Source ID The Source ID field simplifies the creation of a Dial Plan in applications
where the criteria for switching calls to a certain end point is a function of
which end point originated the call.
• Default value = 0. The default ID for all end points is 0 and for all accept
# s is 0. With default values, all calls are routed based only on dialed
number.
• Multiple end points can have the same Source ID
• When creating the Call Accept list, specify a Source ID (s) as well as a
dialed number or range of dialed numbers to accept.
Say, for example, an application requires that all calls originating from Port
1 of the Quad T1/PRI module in Slot 1 be switched to Port 4 of that same
module. Assign a unique
Source ID (e.g., 7) to Port 1 of the module, and
then configure Port 4 to only accept calls from that unique Source ID (7).
»» Swap ANI/DNIS This option swaps the ANI and DNIS numbers received from the Network.
ANI (Automatic Number Identification), is the billing number of the calling
party, and DNIS (Dialed Number Identification Service), is the called party
number.
Send as
provided ATLAS forwards whatever ID it receives (including None).
Substitute if
not present ATLAS inserts a User-defined ID value if no value is re-
ceived.
ID Presentation Sends to the Network control informa-
tion for the presentation of Caller ID
(
Presentation Allowed; Presentation Re-
stricted; Number Not Available
.)
ID Number Value for Caller ID to be sent to the Net-
work(i.e., 256 963 8020).
Substitute
always ATLAS always inserts the User-defined ID in place of the
value received.
ID Presentation Same as above.
ID Number Same as above.
This swap will cause the ATLAS switchboard to use ANI to route
the call. The accept # in the dial plan must use the ANI number, not
the DNIS number.