ADTRAN Atlas 800 Plus, Руководство пользователя

Страница: 81 / 210

Chapter 6. Terminal Menu and System Control
61200226L1-1 ATLAS 800
PLUS
User Manual 6-15
»» Current Update
Status
Read security: 5
Indicates progress or problems encountered during the current update pro-
cess. The field displays
Idle if no update is in progress or when the update
is successfully completed. At the end of a successful update, the contents of
this field are copied into
Previous Update Status .
If you are updating several modules at the same time (if Module Slot is set
to All Modules of a Type ), this option displays
[+]
, indicating this field con-
tains submenu items. The following submenus display:
During the TFTP upload process, various status messages are provided in
Current Update Status (see Table 11-1 on page 11-5).
»» Previous Update
Status
Read security: 5
Displays the status of the previous update. If a firmware update has not
been attempted for a particular slot, this field reads,
Has not been attempted.
Following a successful update the field reads,
Module Update Complete.
If
an update was unsuccessful, the appropriate error message displays.
»» Begin Firmware
Update
Write security: 1; Read security: 5
Begins updating the firmware for the selected modules. To start this action,
enter
Y
to begin or enter
N
to cancel. You can also cancel the operation after
the update has begun. For XMODEM updates, cancel the process via the
terminal emulation software (consult your documentation for information
Restart at Specified
Date and Time Lets you specify a date and time to automatically
restart the updated module. (When you select this
option, a new field called
Restart Date and Time
displays below the current field.)
Restart Date and Time
Write security: 1; Read security: 5
Defines the date and time to restart the system.
• Enter the time using a 24-hour format (i.e.,
23:00:00 for 11:00 pm).
• Enter the date in mm-dd-yyyy format (i.e., 10-
30-1998).
Restart at Specified Date and Time is only available for the
System Controller— not for modules residing in expansion slots,
since they are unable to maintain normal operation during the update
process.
Slt
Indicates the slot number.
Type Defines the type of module for each slot.
Current Status
Indicates the status of the current update.
Previous
Status Indicates the status of the previous update.
Previous Time
Indicates the time of the previous update.