ADTRAN Atlas 800 Plus, Руководство пользователя

Страница: 45 / 210

Chapter 3. Operating the ATLAS 800PLUS
61200226L1-1 ATLAS 800
PLUS
User Manual 3-3
Using Telnet
To connect to the ATLAS 800
PLUS
via Telnet, define the IP address, set the
subnet mask, and, typically, wet the default gateway IP address. The follow-
ing Step/Action tables provide instructions for performing these tasks.
You must define the IP address before attempting to connect via
Telnet.
Instructions for Defining the IP Address
Step Action
1
Obtain an IP address for the ATLAS 800
PLUS
from your LAN
administrator.
2
From the Front Panel, select 2) CONFIG , then S0) SYSTEM , then
1) ETHERNET .
3
When the submenu displays, select 1) IP ADDRESS
.
4
Enter the IP address by entering each number followed by Enter
to move to the next field.
5
Press Enter after keying in the entire IP address.
Instructions for Setting the Subnet Mask
Step Action
1 Obtain a subnet mask address from your LAN administrator.
2
From the Front Panel, select
2) CONFIG ,
then
S0) SYSTEM ,
then
1) ETHERNET .
3 When the submenu displays, select 2) SUBNET MASK .
4
Enter the subnet mask by entering each number followed by
Enter
to move to the next field.
5 Press Enter after keying in the entire subnet mask address.