ADTRAN Atlas 800 Plus, Руководство пользователя

Страница: 76 / 210

Chapter 6. Terminal Menu and System Control
6-10 ATLAS 800
PLUS
User Manual 61200226L1-1
»» Traps Destination Write security: 3; Read security: 5
Defines the destination for SNMP traps as follows:
» System Event
Logging
Write security: 3; Read security: 5
Sets the system event severity level threshold for each of the
ATLAS 800
PLUS
system event types. Whenever a system event occurs, that
event is logged if the event’s severity level is equal to or more severe than
the event type’s current threshold setting. See System Event Logging on page
A-1 for detailed information on the system events.
» Syslog Setup
Write security: 3; Read security: 5
Configures the ATLAS Syslog client for use with a Syslog server (supplied
on ADTRAN /Utility disk or available on most UNIX platforms).
»» Transmission Enables or disables the transmission of log events to the external Syslog
server.
»» Host IP Address Lists the IP address of the external server that is running the Syslog host dae-
mon.
»» Host Facility Specifies the facility destination of log events. Facilities are located on the
host and are managed by the Syslog host daemon running on either a UNIX
machine or a PC.
» Real Time Clock
Write security: 3; Read security: 5
Provides access to the following two options that you can review and edit:
»» Current Time/Date
Displays the current date and time, including seconds. To edit this field, en-
ter the time in 24-hour format (such as 23:00:00 for 11:00 pm), and enter the
date in mm-dd-yyyy format (for example, 09-23-1998).
»» Auto Daylight
Savings
When enabled, automatically updates the time and date when Daylight Sav-
ings Time starts and, also, when Standard Time starts.
IP Address Identifies the IP address to which the network manager
sends traps.
Community
Defines the community name for trap destinations.
This name must match the community name defined at
the network management station.
Trap Filtering Sets the minimum severity level required for a system
event to generate an SNMP trap.
If a trap event occurs and if the trap’s severity level is
equal to or more severe than the trap type’s current
threshold setting, that event is sent as an SNMP trap.
(Refer to the ATLAS 800
PLUS
MIB for a listing of all
traps and their severity levels.)
You can set the following threshold levels for the avail-
able selections: disabled, critical, major, minor, warn-
ing, normal, and info.