ADTRAN Atlas 800 Plus, Руководство пользователя

Страница: 79 / 210

Chapter 6. Terminal Menu and System Control
61200226L1-1 ATLAS 800
PLUS
User Manual 6-13
»» TCID Timer
Write security: 3; Read security: 5
Specifies the length of time both endpoints attempt to negotiate an agree-
able value for bearer channels and channel capacities before deciding the
BONDING call has failed.
»» Call Stagger
Write security: 3; Read security: 5
Specifies the amount of delay between placing calls for outgoing BOND-
ING sessions. Table 6-2 defines the call stagger values.
>
SYSTEM
UTILITY
Use the System Utility menu to view and set the system parameters shown
in Figure 6-4.
Figure 6-4. System Utility Menu
» Update Firmware
Write security: 1; Read security: 5
Updates firmware when ATLAS 800
PLUS
enhancements are released. Two
transfer methods are available for use in updating any modules that contain
Flash memory—including the ATLAS system controller.
The first transfer method uses the ATLAS serial Chain-In port of the system
controller and XMODEM protocol. For detailed information on how to up-
date firmware using this method, see XMODEM Firmware Updates on page
11-1.
The second transfer method uses the ATLAS built-in Ethernet port of the
system controller and TFTP (Trivial File Transfer Protocol). For detailed in-
Table 6-2. Call Stagger Values
Display value Meaning
No Stagger
There is no delay between the call dialing of a BONDING session.
500 ms
Wait approximately ½ second between the call dialing of a BONDING session.
1 sec Wait approximately 1 second between the call dialing of a BONDING session.
2 sec
Wait approximately 2 seconds between the call dialing of a BONDING session.