ADTRAN Atlas 800 Plus, Руководство пользователя

Страница: 132 / 210

Chapter 10. Dial Plan Terminal Menu
10-20 ATLAS 800
PLUS
User Manual 61200226L1-1
OCTAL BRI MODULE (USER TERMINATION)
The Octal BRI with a “U” interface acts as the Network while interfacing to
user equipment (terminal adapters). When you are working in the
Network
Termination section of the Dial Plan menu and the Slot is defined as a
UBRI-8 module, the following interface configuration options are available:
»» Switch Type Write security: 2; Read security: 5
Defines the type of ISDN switch that ATLAS will simulate. If connected to
another ATLAS, both need to be set to the same type. The available options
include Lucent 5E, Northern DMS 100, and National ISDN.
»» SPID List Write security: 2; Read security: 5
ATLAS, acting as the Network, must use a SPID and a phone number in or-
der to satisfy the ISDN connection protocol expected by the User’s Terminal
Adapter (TA).
»» Strip MSD
This option allows a selected quantity of the Most Significant digits of a di-
aled number for ATLAS to be stripped prior to being forwarded out of the
port. Note that the Strip MSD parameter does not affect the Call Accept cri-
teria. All of the digits (including the MSDs that are subsequently stripped)
are used as accept criteria.
»» Source ID
Source ID for the incoming calls.
»» Outgoing Caller ID
Specifies how caller ID information is sent to the user BRI device.
Phone Number The phone number(s) assigned to this BRI phone line.
SPID Number
This entry will define the SPID number(s) which will be
used for this BRI line. Although the value of the SPID is
not significant, a SPID must be entered for each phone
number. For convenience, the SPID can be set to be the
same as the phone number.
ATLAS 800
PLUS
does not support autoSPID detection software
which some terminal adapters offer.
Calls
For User terminations, the number of calls is fixed at 2.
D64, D56,
Audio, Speech These options reflect what the Network has provisioned
for this SPID. If the BRI was purchased with different ser-
vices provisioned for the SPIDs, then the call must match
the services supported.
Send as
provided
Send caller ID information as provided by the user BRI de-
vice.
Substitute if
not present If no caller ID information is provided by the user BRI de-
vice, substitute with
ID Presentation and ID Number .
Substitute
always
Ignore caller ID information is provided by the user BRI
device, and substitute with
ID Presentation
and
I
D Num-
ber
.