ADTRAN Atlas 800 Plus, Руководство пользователя

Страница: 44 / 210

Chapter 3. Operating the ATLAS 800PLUS
3-2 ATLAS 800
PLUS
User Manual 61200226L1-1
Figure 3-2. Example of Basic Front Panel Menu Navigation
USING THE TERMINAL MENU
The terminal menu provides a primary means of monitoring and configur-
ing the ATLAS 800
PLUS
. The terminal menu interface uses the full capabili-
ties of the VT-100 terminal to provide the quickest and most intuitive
operation possible. To receive the full benefit of the terminal menu interface,
you should use a fully VT-100 compatible client. The ADTRAN Utilities flop-
py disks (that you can install on a PC) contain both a VT-100 client and a cus-
tomized Telnet program. See ADTRAN Utilities on page 13-1 for details on
the available programs. You can access the terminal menu using a VT-100
terminal or a computer running VT-100 terminal-emulation software.
The two basic connection methods supported by the ATLAS 800
PLUS
are a a
Telnet session and a direct connection through the EIA-232 Chain In port.
The following sections describe using both of these methods.
1) ETHERNET 1) BAUD RT 9600
S0) SYSTEM 2) FLOW CTL
2) CONFIG S1) 2) CHAIN PORT 3) TYPE
: 4) UNIT ID
S8) 5) INIT MODEM
Setting Up the Unit ID using the Front Panel Menu, CONFIG
Step Action
1
Activate CONFIG by pressing the Front Panel arrow keys or by
pressing the number 2 on the Front Panel. (The cursor flashes on
the number next to the activated selection.) Press Enter on the
Front Panel.
2
Use the Front Panel Arrow Keys to view the submenu items.
3 Select S0) System. Press Enter on the Front Panel.
4
Activate 2) Chain Port using the
Arrow Keys
or by pressing
2
.
Press
Enter on the Front Panel.
5
Activate 4) Unit Id using the Arrow Keys or by pressing 4 . Press
Enter on the Front Panel.
6
The
Unit Id
field displays. Type the new Unit ID in this field and
press Enter on the Front Panel. The new Unit ID is now set.