ACES SYSTEMS Cobra II, Руководство пользователя

Страница: 233 / 438

Gen II
User Manual
11-6 – Fan Blade Mapper Chapter 11 Revision 3.00, Apr 2020
11.1.6. – Optimizing Solution
11.1.6.1. A momentary screen reading “Optimizing Mapping” will be displayed along with
a progression bar. The “Fan Blade Mapper Result” screen, shown below, will be
displayed showing the optimal blade placement for each blade in the set to
achieve the best weight distribution and balance. The Posn is the order of
placement; the blade number is the identifying number of the blade which should
be placed in the corresponding position shown in the Posn column. If you selected
“Yes” in paragraph 11.1.2.8 above, the fourth column will be displayed listing the
Blade Serial number. At the bottom of the screen you will see the Total Error for
the new placement. If you notice that any of the weights shown is not correct, or if
you wish to replace one of the blades with a new blade and its new weight, press
the [F1] “Edit Wt” key. The screen will revert to that shown in paragraph 11.1.5
above. When placement is complete, you may press [OK] to end the job and
return to the “Fan Blade Mapper Job” screen. A record of the job will be stored in
the analyzer for later reference if required.
NOTE
The screen below is for illustration purposes only and does not reflect accurate values for an
actual Blade Optimizer Job.