ACES SYSTEMS Cobra II, Руководство пользователя

Страница: 205 / 438

Gen II
User Manual
10-8 – Fan/Turbine Balance Chapter 10 Revision 2.10, Apr 2020
10.1.2.4. Use the [

] key to move to the toggle field at the bottom of the screen. This field
gives you the option to use the Actual Speeds acquired during the first run as the
target speeds for all subsequent runs OR use the speeds defined on this screen as
the target for ALL runs. Use the [

] key to make your selection.
10.1.2.5. When all fields are completed and set per your requirements, press [OK] to
continue.
10.1.3. – Define Class Weights Screen
10.1.3.1. The “ Define Class Wts ” banner screen (if class weight is selected in paragraph
10.1.1.6) will be displayed. To define a class weight set, do the following:
10.1.3.2. In the “ Set ID ” field, use the keypad to enter a name or part number for the class
weight set you are about to define. The Set ID should be one that is recognizable
and commonly used by everyone who will be using this setup to balance.