ACES SYSTEMS Cobra II, Руководство пользователя

Страница: 15 / 438

Gen II
User Manual
1-3 – Introduction Chapter 1 Revision 2.1 Apr 2020
1.2. – Conventions
The following are writing conventions used throughout the manual to describe certain concepts:

This manual indicates keys/keystrokes in square brackets. For example: [OK], [HOME],
[5], or [F1].

The term “select,” as used in this manual, means to highlight the item on the current
menu by using the arrow keys, then pressing the [OK] key.

The term “Setup,” as used in this manual, means the complete set of information entered
into the analyzer or downloaded from the ACES website and uploaded into the analyzer’s
memory for the purpose of completing a balance, vibration analysis, or track function.
This stored information may then be recalled from a “Setup” menu presented for the
various functions to rapidly configure the analyzer based on the information contained in
the Setup.

The term “Job,” as used in this manual, means the stored Setup information plus the
collected balance, vibration, track, and/or spectral data, and recorded corrective action
taken (if applicable) to correct an undesirable condition. In other words, it is a record of
the analyzer configuration, acquired data, computed data, and user entered data used in
the course of completing the maintenance task.

The “Banner” is the uppermost portion of the screen display, which defines its
relationship to the currently-running analyzer function. The “Highlight Bar” is the
darkened bar (controlled by the use of the arrow keys, [

] and [

]) used to identify and
select the current menu item. (See figure below.) These screens and their selection
options are referred to as “banner screen menus” throughout the text of this manual. The
example screen below, for instance, is the “Main Menu” banner screen.