ABB IRB 1100, Руководство по эксплуатации продукта

Страница: 632 / 766

Note Action
xx1800003289
Jog the robot to the specified position:
• Axis 1: 0°
• Axis 2: 110° (IRB 1100-4/0.475) /95° (IRB
1100-4/0.58)
• Axis 3: -20° (IRB 1100-4/0.475)/ -6° (IRB
1100-4/0.58)
• Axis 4: 0°
• Axis 5: 0°
• Axis 6: No significance.
2
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the safeguarded
space.
3
CAUTION
For robots with protection type Clean Room
Always cut the paint with a knife and grind the
paint edge when disassembling parts of the robot!
See
Cut the paint or surface on the robot before
replacing parts on page 123 .
4
Removing the axis-2 motor
Note Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
1
CAUTION
For robots with protection type Clean Room
Always cut the paint with a knife and grind the
paint edge when disassembling parts of the robot!
See
Cut the paint or surface on the robot before
replacing parts on page 123 .
2
Continues on next page
632 Product manual - IRB 1100
3HAC064992-001 Revision: L
© Copyright 2019-2022 ABB. All rights reserved.
5 Repair
5.8.2 Replacing the axis-2 gearbox
Continued