ABB IRB 1100 Скачать руководство пользователя страница 748

Страница: 748 / 766

8.3 Scrapping of robot

Note

The decommissioning process shall be preceded by a risk assessment.

Important when scrapping the robot

DANGER

The risk assessment should consider hazards arising in the decommissioning,
such as, but not limited to:

•

Always remove all batteries. If a battery is exposed to heat, for example
from a blow torch, it will explode.

•

Always remove all oil/grease in gearboxes. If exposed to heat, for example
from a blow torch, the oil/grease will catch fire.

•

When motors are removed from the robot, the robot will collapse if it is not
properly supported before the motor is removed.

•

A used robot does not have the same performance as on delivery. Springs,
brakes, bearings, and other parts might be worn or broken.

748

Product manual - IRB 1100

3HAC064992-001 Revision: L

8 Decommissioning

8.3 Scrapping of robot

Содержание IRB 1100































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание IRB 1100

Отзывы:

Бренды по названию

Популярные бренды

ABB IRB 1100, Руководство по эксплуатации продукта

Результаты поиска

Содержание IRB 1100

Отзывы:

Бренды по названию

Популярные бренды