3Com 5500-EI PWR, Справочное руководство

Страница: 453 / 1314

4-19
using the same rp-policy keyword are configured, when any of the peers receives an SA message,
it will forward the SA message to the other peers.
z
Use the rp-policy keyword for none of the MSDP peers. In this case, based on the configuration
sequence, only the first static RPF peer whose connection state is UP is active. All the SA
messages from this peer will be accepted and those from other static RPF peers will be discarded.
Once the active static RPF peer fails (because the configuration is removed or the connection is
terminated), based on the configuration sequence, the subsequent first static RPF peer whose
connection is in the UP state will be selected as the active static RPF peer.
Related commands: peer , ip ip-prefix .
Examples
# Configure a static RPF peer.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ip ip-prefix list1 permit 130.10.0.0 16 greater-equal 16 less-equal 32
[Sysname] msdp
[Sysname-msdp] peer 130.10.7.6 connect-interface Vlan-interface 100
[Sysname-msdp] static-rpf-peer 130.10.7.6 rp-policy list1
timer retry
Syntax
timer retry seconds
undo timer retry
View
MSDP view
Parameters
seconds : Connection request retry interval in seconds, ranging from 1 to 60.
Description
Use the timer retry command to configure the connection request retry interval.
Use the undo timer retry command to restore the default.
By default, the connection request retry interval is 30 seconds.
Related commands: peer connect-interface .
Examples
# Set the connection request retry interval to 60 seconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] msdp
[Sysname-msdp] timer retry 60