3Com 5500-EI PWR, Справочное руководство

Страница: 1095 / 1314

1-8
Parameters
None
Description
Use the info-center enable command to enable the information center.
Use the undo info-center enable command to disable the information center.
The switch can output system information to the log host, the console, and other destinations only when
the information center is enabled.
By default, the information center is enabled.
Related commands: display info-center , info-center loghost , info-center logbuffer , info-center
console channel , info-center monitor channel , info-center trapbuffer , info-center snmp
channel .
Examples
# Enable the information center.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] info-center enable
% Information center is enabled
info-center logbuffer
Syntax
info-center logbuffer [ channel { channel - number | channel - name } | size buffersize ]*
undo info-center logbuffer [ channel | size ]
View
System view
Parameters
channel : Sets the channel through which information outputs to the log buffer.
channel - number : Channel number, ranging from 0 to 9, corresponding to the 10 channels of the
system.
channel - name : Channel name, by default, the name of channel 0 to channel 9 is (in turn) console ,
monitor , loghost , trapbuffer , logbuffer , snmpagent , channel6 , channel7 , channel8 , channel9 .
size buffersize : Specifies the size of the log buffer (number of messages the buffer holds) you want to
display. The buffersize argument ranges from 0 to 1,024 and defaults to 512.
Description
Use the info-center logbuffer command to enable information output to the log buffer.
Use the undo info-center logbuffer command to disable information output to the log buffer.
By default, information output to the log buffer is enabled with channel 4 (logbuffer) as the default
channel and a maximum buffer size of 512.
This command works only when the information center is enabled.