3Com 5500-EI PWR, Справочное руководство

Страница: 622 / 1314

1-10
View
System view
Parameters
timer : Interval for checking whether an online user is idle. It ranges from 10 to 86400 seconds. Value 0
means the idle user checking function is disabled.
Description
Use the web-authentication timer idle-cut command to set the idle user checking interval for Web
authentication.
Use the undo web-authentication timer idle-cut command to restore the default.
By default, the idle user checking interval is 900 seconds for Web authentication.
The idle user checking interval is the interval at which the system checks whether a user is idle. When a
user is found idle, if the corresponding MAC address entry has not been aged out, the system keeps the
user online; otherwise, the system logs off the user. You are recommended to set the interval to a value
that is greater than half of the MAC address entry aging time but less than the MAC address entry aging
time.
Examples
# Set the idle user checking interval to 500 seconds for Web authentication.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] web-authentication timer idle-cut 500
web-authentication timer max-online
Syntax
web-authentication timer max-online timer
undo web-authentication timer max-online
View
System view
Parameters
Timer : Maximum online time specified for online users, in the range of 10 to 86400, in seconds. Value 0
means there is no limit to the online time of users.
Description
Use the web-authentication timer max-online command to set the maximum online time for online
users. If a user does not log off after the online timer expires, the switch will log off the user forcibly.