3Com 5500-EI PWR, Справочное руководство

Страница: 368 / 1314

5-2
apply tag
Syntax
apply tag value
undo apply tag
View
Route policy view
Parameters
value
: Tag value of a route, in the range of 0 to 4294967295.
Description
Use the
apply tag
command to configure a tag for a route.
Use the
undo apply tag
command to remove the configuration.
By default, no tag is configured for a route.
Related commands:
if-match interface
,
if-match acl
,
if-match ip-prefix
,
if-match ip next-hop
,
if-match cost
,
if-match tag
,
route-policy
,
apply cost
.
Examples
# Create a routing policy named policy and node 1 with the matching mode being permit. Apply the tag
100 to routes matching ACL 2000.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] route-policy policy permit node 1
%New sequence of this list
[Sysname-route-policy] if-match acl 2000
[Sysname-route-policy] apply tag 100
display ip ip-prefix
Syntax
display ip ip-prefix
[
ip-prefix-name
]
View
Any view
Parameters
ip-prefix-name
: Name of an IP-prefix, a string of up to 19 characters.
Description
Use the
display ip ip-prefix
command to display information about an IP-prefix(es).
When
ip-prefix-name
is not specified, information about all the configured IP-prefixes is displayed.
Related commands:
ip ip-prefix
.