3Com 5500-EI PWR, Справочное руководство

Страница: 467 / 1314

5-14
igmp-snooping router-aging-time
Syntax
igmp-snooping router-aging-time seconds
undo igmp-snooping router-aging-time
View
System view
Parameters
seconds : Aging time of router ports, in the range of 1 to 1,000, in seconds.
Description
Use the igmp-snooping router-aging-time command to configure the aging time of router ports.
Use the undo igmp-snooping router-aging-time command to restore the default aging time.
By default, the aging time of router ports is 105 seconds.
The aging time of router ports should be about 2.5 times the IGMP query interval.
Related commands: igmp-snooping max-response-time , igmp-snooping .
Examples
# Set the aging time of the router port to 500 seconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] igmp-snooping router-aging-time 500
igmp-snooping query-pkt-deny
Syntax
igmp-snooping query-pkt-deny
undo igmp-snooping query-pkt-deny
View
Ethernet port view
Parameters
None
Description
Use the igmp-snooping query-pkt-deny command to disable a port from becoming a router port.
Use the undo igmp-snooping query-pkt-deny command to cancel the configuration.
By default, a port is not disabled from becoming a router port.
After you execute this command on a port of a switch, the switch does not forward IGMP query
messages received from the port nor maintains it as a router port. This feature is mainly used in MFF
networks to prevent user ports from forwarding IGMP membership report messages to other hosts, thus
protecting Layer 2 isolation.