1-37
stp root secondary
Syntax
stp
[
instance instance-id
]
root secondary
[
bridge-diameter
bridgenum
[
hello-time
centi-seconds
] ]
undo stp
[
instance instance-id
]
root
View
System view
Parameters
instance-id
: MSTI ID ranging from 0 to 16. The value of 0 refers to the CIST.
bridgenum
: Network diameter of the specified spanning tree. This argument ranges from 2 to 7 and
defaults to 7.
centi-seconds
: Hello time in centiseconds of the specified spanning tree. This argument ranges from
100 to 1,000 and defaults to 200.
Description
Use the
stp root secondary
command to configure the current switch as a secondary root bridge of a
specified MSTI.
Use the
undo stp root
command to cancel the current configuration.
By default, a switch does not operate as a secondary root bridge.
If you do not specify the
instance-id
argument, the two commands apply to only the CIST.
You can configure one or more secondary root bridges for an MSTI. If the switch operating as the root
bridge fails or is turned off, the secondary root bridge with the least MAC address becomes the root
bridge.
You can specify the network diameter and the hello time of the switch when you are configuring it as a
secondary root bridge. The switch will then figure out the other two time parameters: forward delay and
max age. If the
instance-id
argument is specified to 0 in this command, the current switch is configured
as the secondary root bridge of the CIST. You can configure only one root bridge for an MSTI but you
can configure one or more secondary root bridges for an MSTI.
Once a switch is configured as the root bridge or a secondary root bridge, its priority cannot be modified.
Examples
# Configure the current switch as a secondary root bridge of MSTI 4, setting the network diameter of the
switched network to 5 and the hello time of the current switch to 300 centiseconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] stp instance 4 root secondary bridge-diameter 5 hello-time 300
Содержание 5500-EI PWR
