3Com 5500-EI PWR, Справочное руководство

Страница: 565 / 1314

1-46
View
System view
Parameters
radius-scheme-name
: Name of the RADIUS scheme to be created, a string of up to 32 characters.
Description
Use the
radius scheme
command to create a RADIUS scheme and enter its view.
Use the
undo radius scheme
command to delete a specified RADIUS scheme.
By default, a RADIUS scheme named "system" has already been created in the system.
Note that:
z
All the attributes of RADIUS scheme "system" take the default values, which you can see by using
the
display radius scheme
command.
z
The RADIUS protocol configuration is performed on a RADIUS scheme basis. For each RADIUS
scheme, you should specify at least the IP addresses and UDP port numbers of the RADIUS
authentication/authorization and accounting servers, and the parameters required for the RADIUS
client to interact with the RADIUS servers. You should first create a RADIUS scheme and enter its
view before performing RADIUS protocol configurations.
z
A RADIUS scheme can be referenced by multiple ISP domains simultaneously.
z
The
undo radius scheme
command cannot delete the default RADIUS scheme. In addition, you
are not allowed to delete a RADIUS scheme which is being used by an online user.
Related commands:
key
,
retry realtime-accounting
,
scheme
,
timer realtime-accounting
,
stop-accounting-buffer enable
,
retry stop-accounting
,
server-type
,
state
,
user-name-format
,
retry
,
display radius scheme
,
display radius statistics
.
Examples
# Create a RADIUS scheme named radius1 and enter its view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1]
radius trap
Syntax
radius trap
{
authentication-server-down | accounting-server-down
}
undo radius trap
{
authentication-server-down | accounting-server-down
}
View
System view