3Com 5500-EI PWR, Справочное руководство

Страница: 219 / 1314

1-2
[Sysname-detect-group-10]
detect-list
Syntax
detect-list list-number ip address ip-address [ nexthop ip-address ]
undo detect-list list-number
View
Detected group view
Parameters
list-number : Sequence number of the IP address to be detected. This argument ranges from 1 to 10.
ip address ip-address : Specifies the destination IP address (in dotted decimal notation) to be detected.
nexthop ip-address : Specifies the next hop IP address (in dotted decimal notation) for Auto Detect.
When configuring the destination IP address for Auto Detect, you can specify the next hop address as
required. For example, when multiple routes reach the destination IP address, you can specify Auto
Detect to detect a specific link. With the next hop address specified, if the destination IP address to be
detected and the Auto Detect-enabled switch are not on the same network segment, the ICMP packets
will be forwarded to the specified next hop.
Description
Use the detect-list command to add a detected object to a detected group and specify the detection
sequence number of the detected object.
Use the undo detect-list command to remove a specified detected object.
When performing Auto Detect, a switch detects the configured detected objects in the order specified by
their sequence numbers.
If you have configured multiple detected objects, you can use the option command to set the logical
relationships between the detected objects.
Related commands: option .
Examples
# Add the detected object 202.13.1.55 to detected group 10, with the detection sequence number set to
1, and the next hop IP address set to 1.2.3.4.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] detect-group 10
[Sysname-detect-group-10] detect-list 1 ip address 202.13.1.55 nexthop 1.2.3.4