3Com 5500-EI PWR, Справочное руководство

Страница: 119 / 1314

1-6
Description
Use the reset garp statistics command to clear the GARP statistics (including statistics about packets
received/sent/discarded by GVRP) on the specified or all ports. You can use the display garp
statistics command to view the NDP statistics before and after the execution of the reset garp
statistics command to verify the execution result.
Executing the reset garp statistics command without any parameter clears the GARP statistics of all
ports.
Related commands: display garp statistics .
Examples
# Clear GARP statistics of all ports.
<Sysname> reset garp statistics
GVRP Configuration Commands
display gvrp statistics
Syntax
display gvrp statistics [ interface interface-list ]
View
Any view
Parameters
interface interface-list : Specifies an Ethernet port list. By providing a value for this argument, you can
display the GVRP statistics on the specified ports. You need to provide the interface-list argument in the
format of { interface-type interface-number [ to interface-type interface-number ] } &<1-10>, where the
interface-type argument represents the port type, the interface-number argument represents the port
number, and & <1-10> means that you can provide up to 10 port indexes/port index ranges for this
argument.
Note that, this command displays GVRP statistics only on the trunk ports included in the list. Statistics
on non-trunk ports will not be displayed.
Description
Use the display gvrp statistics command to display the GVRP statistics of trunk ports.
This command displays the following information:
z
GVRP status
z
Number of the GVRP entries that fail to be registered
z
Source MAC address of the previous GVRP PDU
z
GVRP registration type of a port
Examples
# Display the GVRP statistics of Ethernet1/0/1, assuming that the port is a trunk port.
<Sysname> display gvrp statistics interface Ethernet 1/0/1
GVRP statistics on port Ethernet1/0/1