3Com 5500-EI PWR, Справочное руководство

Страница: 42 / 1314

2-5
View
System view
Parameters
v1 : SNMPv1.
v2c : SNMPv2c.
v3 : SNMPv3.
user-name : User name, a string of 1 to 32 characters.
group-name : Name of the group to which the user corresponds. This argument is a string of 1 to 32
characters.
cipher : Specifies the authentication or encryption password to be in ciphertext.
authentication-mode : Requires authentication. If this keyword is not provided, neither authentication
nor encryption is performed.
md5 : Adopts HMAC-MD5 algorithm.
sha : Adopts HMAC-SHA algorithm.
auth-password : Authentication password, a string of 1 to 64 characters in plain text, a 32-bit
hexadecimal number in cipher text if MD5 algorithm is used, and a 40-bit hexadecimal number in cipher
text if SHA algorithm is used.
privacy : Encrypts packets.
des56 : Specifies data encryption standard (DES) for encrypting.
aes128 : Specifies advanced encryption standard (AES) for encrypting.
priv-password : Encryption password, a string of 1 to 64 characters in plain text, a 32-bit hexadecimal
number in cipher text if MD5 algorithm is used, and a 40-bit hexadecimal number in cipher text if SHA
algorithm is used.
acl-number : Basic ACL number, ranging from 2000 to 2999.
local : Specifies local entity users.
engineid -string: Engine ID associated with the user, a string of even number of hexadecimal numbers
and comprising of 10 to 64 hexadecimal digits.
Description
Use the snmp-agent usm-user command to add a user to an SNMP group. You can also optionally
use this command to apply an ACL for network management users.
Use the undo snmp-agent usm-user command to remove an SNMP user from the corresponding
SNMP group and to remove the ACL configuration on the user.
Examples
# Add a user named aaa to an SNMP group named group1 , specify to require authentication, specify
the authentication protocol as HMAC-MD5-96 and authentication password as 123 , and apply ACL
2002 to filter network management users (assuming that ACL 2002 already exists).
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] snmp-agent usm-user v3 aaa group1 authentication-mode md5 123 acl 2002