3Com 5500-EI PWR, Справочное руководство

Страница: 637 / 1314

1-13
Examples
# Create detected group 10 and specify to detect the IP address of 202.12.1.55.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] detect-group 10
[Sysname-detect-group-10] detect-list 1 ip address 202.12.1.55
# Specify to decrease the priority of the master of VRRP group 1 by 20 when detected group 10 is
unreachable .
[Sysname] interface vlan-interface 2
[Sysname- Vlan-interface2] vrrp vrid 1 track detect-group 10 reduced 20
vrrp vrid virtual-ip
Syntax
vrrp vrid virtual-router-id virtual-ip virtual-address
undo vrrp vrid virtual-router-id [ virtual-ip virtual-address ]
View
VLAN interface view
Parameters
virtual-router-id : VRRP group ID, ranging from 1 to 255.
virtual-address : Virtual IP address to be configured.
Description
Use the vrrp vrid virtual-ip command to create a VRRP group and configure the virtual IP address for
the VRRP group, or add a virtual IP address to the virtual IP address list of an existing VRRP group. You
can add up to 16 virtual IP addresses for a VRRP group.
Use the undo vrrp vrid virtual-ip command to remove an existing VRRP group, or remove a virtual IP
address from the virtual IP address list of an existing VRRP group. A VRRP group is removed if all its
virtual IP addresses are removed.
By default, no VRRP group is created.
Note that:
z
A virtual IP address cannot be an all-zero address (0.0.0.0), a broadcast address
(255.255.255.255), a loopback interface, a non-A/B/C class address, or an illegal IP address, such
as 0.0.0.1.
z
Virtual IP addresses of a VRRP group must be in the same network segment with the IP address of
the interface where the VRRP group is configured. Otherwise, the VRRP group cannot work
normally.