3Com 5500-EI PWR, Справочное руководство

Страница: 361 / 1314

4-47
router id
Syntax
router id router-id
undo router id
View
System view
Parameters
router-id
: Router ID, in dotted decimal notation.
Description
Use the
router id
command to configure the ID of a router running the OSPF protocol.
Use the
undo router id
command to cancel the router ID that has been set.
If the
router-id
command is not used, a router ID is set following these rules:
z
If loopback interfaces configured with IP addresses exist, the greatest loopback interface IP
address will be used as the router ID.
z
If no loopback interface IP address exists, the greatest IP address of other interfaces will be used
as the router ID, regardless of whether the interfaces are up or down.
z
A new router ID is selected only after the existing router ID is deleted or modified. Other cases, for
example, when the interface with the router ID goes down, when a loopback interface address is
configured after a non-loopback interface address is selected as the router ID, or when a greater
interface IP address is configured, cannot trigger a new router ID selection process,
z
To validate a new router ID, you need to execute the
reset
command.
Related commands:
ospf
.
Examples
# Set the router ID to 10.1.1.3.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] router id 10.1.1.3
silent-interface
Syntax
silent-interface silent-interface-type silent-interface-number
undo silent-interface silent-interface-type silent-interface-number