ZyXEL Communications VES-1000 Series, User Manual, Page: 204 / 227

VES-1000 Series Ethernet Switch
24-14 Switch-Related Commands
Figure 24-18 STP Counter Display Example
Refer to the table of Spanning Tree Protocol status for information on the fields displayed .
24.8 Switch Driver Commands
The following table shows the switch driver commands supported by the VES.
Table 24-7 Switch Driver Commands
COMMAND DESCRIPTION
switch driver count disp This command shows the switch counter.
switch driver count clear This command clears the switch counters.
24.8.1 Display Switch Driver Counter Command
sw driver count disp
Use this command to show NDIS-level (Network Driver Interface Specification, a network interface card
specification) counters.
Bridge Info:
(1) DesignatedRootBridgeID:
(2) RootPathCost:
(3) RootPortID:
(4) MaxAge:
(5) HelloTime:
(6) ForwardDelay:
(7) BridgeID:
(8) BMaxAge:
(9) BHelloTime:
(10) BForwardDelay:
(11) TopologyCgangeDetected:
(12) TopologyChange:
(13) TopologyChangeTime:
(14) HoldTime:
8000-00a0c5012345
0
0x0000
5120 (1/256 sec)
512 (1/256 sec)
3840 (1/256 sec)
8000-00a0c5012345
5120 (1/256 sec)
512 (1/256 sec)
3840 (1/256 sec)
0
0
8960 (1/256 sec)
256 (1/256 sec)
Port_0 Info:
(1) Port ID:
(2) Port State:
(3) Enable:
(4) PathCost:
(5) Designated Root:
(6) Designated Cost:
(7) Designated Bridge:
(8) Designated Port:
(9) TopologyChangeAcknowledge:
(10)ConfigPending:
(11) ForwardTransition: 0x8000
4
1
100
8000-00a0c5012345
0
8000-00a0c5012345
0x8000
0
0
1
STP Counter:
SendConfCount:
SendTCNCount:
RecConfigBPDU:
RecTCNBPDU:
262
0
0
0